Wamak specialises in a diverse range of residential heat pumps, offering both Air-Water and Water-Water solutions. With a wide selection of models, they can cater to the heating needs of single-family homes and small buildings, delivering power of up to 20kW. Their lineup accommodates various installation preferences, allowing you to choose between split units for seamless indoor and outdoor integration, indoor units ideal for utility rooms, or outdoor units for added convenience and space optimisation. With Wamak, you can trust in their versatile and efficient heat pumps to keep your home warm and comfortable throughout the seasons.

Air-to-Water Heat Pumps

AiWa L Natura

Compact air-to-water heat pump for heating, cooling and domestic hot water with the possibility for outdoor installation. A short closed refrigerant circuit with a silent scroll compressor controlled by inverter allows for capacity modulation in wide range. Monoblock design simplifies installation and helps for long-term stable operation.

The primary source is the heat energy from the ambient air, which is blown by a silent fan in the shape of an owl’s wing through a heat exchanger made of copper and aluminium.

AiWa EVI H Outdoor

Compact air-to-water heat pump for heating, cooling and domestic hot water with the possibility of installation either in the utility room or outdoors. A short closed refrigerant circuit with a silent scroll compressor at the bottom under the fan simplifies installation and helps for long-term stable operation.

The primary source is the heat energy from the ambient air, which is blown by a silent fan in the shape of an owl’s wing through a heat exchanger made of copper and aluminium.

AiWa EVI H Indoor

Compact air-to-water heat pump for heating, cooling and domestic hot water with the possibility of installation either in the utility room or outdoors. A short closed refrigerant circuit with a silent scroll compressor at the bottom under the fan simplifies installation and helps for long-term stable operation.

The primary source is the heat energy from the ambient air, which is blown by a silent fan in the shape of an owl’s wing through a heat exchanger made of copper and aluminium.

AiWa EVI Split

Split heat pump for heating, cooling and domestic hot water in split design with outdoor and indoor unit. The silent Scroll compressor is located in the indoor unit and, in contrast, the heat exchanger and fan are located outside the building. The split design will allow installation in more challenging conditions during renovations where the energy source is located further away from the utility room.

The primary source is the heat energy from the ambient air, which is blown by a silent fan in the shape of an owl’s wing through a heat exchanger made of copper and aluminium.

Water-to-Water Heat Pumps

WW BLOCK

Compact heat pump for heating and domestic hot water with passive cooling control. A short closed refrigerant circuit with a quiet scroll compressor helps for long-term stable operation.
Use for single-family houses and smaller buildings with a heat output requirement of up to 20 kW.

As a primary source, thermal energy from underground water at a depth of between 12 and 30 metres is used. A submersible pump delivers the groundwater to the heat pump and, depending on the quality and chemical composition, the heat from the groundwater is extracted either directly in the heat pump or through a separating heat exchanger with an intermediate circuit and antifreeze. The heat pump then raises this temperature to a usable temperature for heating or hot water.

WW EVI Comfort

Compact heat pump for heating and domestic hot water with passive cooling control. A short closed refrigerant circuit with a quiet scroll compressor helps for long-term stable operation.
Use for single-family houses and smaller buildings with a heat output requirement of up to 20 kW.

As a primary source, thermal energy from underground water at a depth of between 12 and 30 metres is used. A submersible pump delivers the groundwater to the heat pump and, depending on the quality and chemical composition, the heat from the groundwater is extracted either directly in the heat pump or through a separating heat exchanger with an intermediate circuit and antifreeze. The heat pump then raises this temperature to a usable temperature for heating or hot water.

BW BLOCK

Compact heat pump for heating and domestic hot water with passive cooling control. Short closed refrigerant circuit with silent scroll compressor contributes to long-term stable operation.
Use for single-family houses and smaller buildings with a heat output requirement of up to 20 kW.

As a primary source, the thermal energy of the sun accumulated in the ground through a horizontal collector or geothermal energy through a deep borehole is used. In the collector or borehole, an antifreeze flows which takes the energy of the earth at a low temperature and the heat pump raises this temperature to a temperature usable for heating or hot water.

BW EVI

Compact heat pump for heating and domestic hot water with passive cooling control. Short closed refrigerant circuit with silent scroll compressor contributes to long-term stable operation.
Use for single-family houses and smaller buildings with a heat output requirement of up to 20 kW.

As a primary source, the thermal energy of the sun accumulated in the ground through a horizontal collector or geothermal energy through a deep borehole is used. In the collector or borehole, an antifreeze flows which takes the energy of the earth at a low temperature and the heat pump raises this temperature to a temperature usable for heating or hot water.