Womix is a leading company specialising in the trade and production of valves for central heating systems. With their extensive experience in the heating industry, Womix provides a comprehensive range of equipment designed to streamline and automate the installation of central heating systems. By leveraging their expertise, Womix offers users a complete system of devices that guarantee the highest quality of life and energy efficiency. Their offerings are designed to simplify the installation process for both end-users and installers, ensuring a user-friendly experience and optimal results.

With Womix, customers can trust in the reliability and effectiveness of their products to meet their central heating needs.

Thermostatic mixing units

Devices that regulate and maintain the desired temperature of water by blending hot and cold water together.

Features:

• Available DN 20
• Max. Pressure: 8 bar
• Maximum temperature of 120°C
• Dimensions (L x W x H): 302x180x90mm
• Factory insulated
• 2 and 3 pump connection headers

SMTC Series

With mixing valve application: Space heating, process heat, and cooling systems. The SMTC pump group is equipped with a thermostatic mixing valve, thermostatic actuator, rebated safety thermostat, two brass ball valves with thermometer’s for supply and return, connector with check valve and insulation. The pump comes with a Wilo circulation pump

SA series

Without mixing valve application: Space heating and process heat systems. The SA pump group is equipped with two ball valves with thermometers, check valves, a Wilo circulation pump. Available from DN25 to DN50.

Pump Cascade System

Features

• High Pressure Boost: Combine multiple pumps for exceptional pressure levels
• Optimal Energy Utilisation: Convert excess electricity into useful work, reducing costs
• Customisable Solutions
• Broad Applications: Ideal for water treatment, refineries, and more.
• Proven Performance: Built with quality components for reliable operation

1. Pump Group DN 25/ DN 32
2. Distributor for cascade of hanging boilers MK 125

MK 65, 80, 100, 125 cascade manifolds are available as two-circuit or three-circuit modules, allowing for any configuration of the cascade

Hydraulic Separators

Hydraulic Separators CPN

Connects independent hydraulic circuits to avoid flow rate variations and circuit prevalence. It’s installed when the primary circuit pump interacts with secondary circuit pumps in the same system

Hydraulic Separator MIX-BOX

Constructed using steel, the factory installation includes a 1/2″ insulation sleeve plunger, a temperature sensor, and an automatic air vent with a 1/2″ check valve

Hydraulic separator CPN MIX-BOX has been produced to ensure the full control of MIX-BOX system.

Hydraulic Separators XP

Steel Units equipped with insulation. They have a vent connection (1/2″ coupler) and a temperature sensor mount on the upper side, and a drain connection (1/2″ coupler) on the lower side. This set also includes a 1/2″ check valve for the air vent and a 1/2″ drain valve.

• Automatic Air Vent
• Built-in tube for temperature sensor
• Drain Valve

Hydraulic Separators XPN

Made of steel and comes with insulation. It features two connections on the upper side for a temperature sensor and air vent (1/2″ coupler), along with a bottom connection for drainage (1/2″ coupler). Additionally, the set includes a 1/2″ check valve for the air vent, a 1/2″ immersion sleeve for the temperature sensor, and a 1/2″ drain valve.

Hydraulic Separators for Two Heat Sources CPN 2F

CPN 70 2F – DN25:

Made of steel with insulation. Includes a 1/2″ vent connection, built-in temperature sensor pipe, 1/2″ drain connection, 1/2″ air vent, 1/2″ drain valve, four 1″ cast iron fitting, and wall brackets

CPN 100 2F – DN32:

Made of steel with insulation, upper connections for temperature sensor and vent (1/2″ coupler), 1/2~ drain connection, 1/2″ air vent (foot valve). 1/2″ plunger sleeve for temperature sensor, 1/2″ drain valve, two 1 1/4″ cast iron fittings, and wall brackets.

Underfloor Manifold System

Experience Efficient and reliable brass central heating manifolds. These components streamline hot water or steam distribution in hydronic heating systems. Made from durable brass, they ensure lasting performance and corrosion resistance. Integrated shut-off or flow control valves provide precise heating zone control. Simplify installation and maintenance while optimising comfort.

4 Different Types for Underfloor Heating!

• Material: Brass
• Construction: C-Profile Brass beams
• Operating Temperature : 70°C – 95°C
• Operating Pressure: 6 bar

Air Filters and Separators

Magnetic Filter with Strainer FM

Removes solid pollutants from water in heating systems and air-conditioning systems. It ensures proper operation of equipment and prevents the build-up impurities. Benefits of using the filter include reducing the risk of damage to the system, quiet operation, and easy removal of contaminants without shutting down the system.

Magnetic Separator SM 20 – DN 20

Removes Water contaminants in heating systems, preventing wear on components and improving system efficiency. The separator safeguards the heat exchanger, radiator ends, and pipes from blockages caused by dirt. It can be installed vertically or horizontally, offers excellent filtration, and allows for easy removal of impurities during normal operation.

Click here for Commercial Womix Pumpstation and Header sets